SSR Switch V - For vertical installation
Technical Features Specs Electrical data Max 48Vac 250mA(3VA) wire: (2 x 0,14mm²) Switch angel <= 10 º production tolerance Repeatment accuracy approx. 3º Temperature From +5ºC to 90ºC Use Fluids with a density > 0,9 Installation From the top of the reservoir: Ø 21mm Materials Polypropylen, nitril rubber, silicone
SSR-Switch V is an improvement of the SSR-Switch H model. Instead of installing in the side of a bath, this switch can also be installed in the top of the bath. Like our other level switches, we are dealing with a special construction without movable joints. SSR-Switch V is therefore newer stuck regardless to the amount of oil og frease there may be in the reservoir. Further more SSR-Switch V has the advantage that the height can be adjusted. Since the repeatment accuracy is better than 3%, a fairly accurate level of the fluid can be set and kept. The level switch is connected to the desired equipment through a PLC or Computer station. (Max. power input on the PLC/Computer device should be 48 Vac)
The level switch is produced in two types: SSR-Switch V-Off will switch off when the fluid level in the bath raises. SSR-Switch V-On will switch on when the fluid level in the bath raises.
All these features makes SSR-Switch V an unique unit which never wears out. All this almost sounds too good to be true- but it is true- and even better is the price and guarantee. So do not doubt for a minute, this in an unregretable investment!
Also see SSR-Switch H. This model is made for horizontal installation. >>Click here to go to SSR-Switch H