Mixer valve for cutting fluids and more
Mixer Valve for mixing of cutting fluids and other non-corrosive fluids. Very easy to use and extremely accurate! Made with safety contra valve which prevents back flush. With scale for easy adjustment!
Technical Features Specs
Fittings ½” inlet, - ½” outlet
Minimum water pressure: 1 bar
Range 0 til approx. 14%
Safety 2 contra valves to prevent back flush
Installation kit Included
Adjustment Hand wheel with scale.
Dimensions & weight 250x 190 x 70 mm · 1,4 kg. 
 
 

This is why you should purchase a mixer valve;

  • Easy and fast to use.
  • Cost effecient equipment. When mixing your coolants correct you save coolant and your tools last longer!
  • Very accurate
  • Easy to adjust - just set the percentage and open the water!
Mixer valve made for easy fitting on a drum. Inlet and outlets are made to fit a standard water hose. This mixer valve is distinguished by its outstanding accuracy, which makes it very easy to find the correct mixture of you cutting fluids and water, and in this way save production costs.
When the mixer is fitted on the drum, simply adjust the wheel using the scale to find the mixture you need (See picture of the scale below). Now open the water and the mixer will do the rest of the work for you - fast, easy and cost efficient. Using the right mixture of cutting fluids will make your tools last longer and you will save cutting fluids, and thereby keep your running cost as low as possible.
To ensure the mixture is completely correct the mixture can be measured using our brix refractometer. Small divergences from the scale can happened if working with changing viscosity or water pressure.
Above: Easy adjustment with scale on the hand wheel